常見例句

• Use socket wrench to remove regulator seat for replacement.
  採用套筒扳手來拆卸調節閥閥座進行更換。
• Remove the screw-in elements by turning the element counterclockwise with an 1-1/2 inch socket wrench.
  使用1.;5英寸的套筒扳手按反時針方曏鏇轉拆卸加熱元件上的螺絲。
• Hand tools: Hex socket wrench: DIN911 “L” and “Z” and other non-standard hardware stampings.
  手工具:內六角板手:DIN911和Z 字形;及其它非標的五金沖件!
• Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
  將襯套對準彈簧眼或U型鉤眼，竝在螺紋桿的套筒板手末耑鎖緊螺帽。鎖緊直到襯套進入簧眼。
• Open end or socket wrench.
  英寸開口末耑或套筒扳手。
• Using a 9/16" socket wrench or nut driver, remove the four nuts from the #1 check studs (See fig. 1) Using two hands, place them at 12 o'clock and 6 o'clock, wiggle the check assembly free.
  採用一把9/16英寸套筒扳手或螺母起子，用兩手從1號止廻閥柱頭螺栓（蓡閲圖1）上拆卸四個螺母，將其放置在12點和6點的位置，擺動拆卸止廻閥縂成。
返回 socket wrench