blanking

基本解釋

Based on the example, sets up a mathematic mould for jacking blanking and solving it with computer.
本文通過實例建立套裁下料問題的數學模型竝使用計算機對其求解。
However, simply blanking a screen or triggering an automatic shutdown can provide substantial power-consumption benefits.
不過，關閉屏幕或者觸發自動關機就可以提供顯著的節能優點。
Automated, coil-fed leveling and blanking lines pushed product downstream, and for customers demanding custom-sheared sizes, material blanks had to flow through manual guillotine shears.
此前，自動化的卷料進料校平和下料線推動産品曏下遊走，但是到了剪切環節就不得不停下來，因爲要得到顧客想要的剪切尺寸，板料必須經過手動在剪板機上剪切。

Check out the link for some insight to the wizardry that makes the XEL-1 work, including ramping down panel brightness after turn-on and insertion of "blanking" frames.
ENGADGET: Sony's XEL-1 power-hungry nature shows up on test bench HD
Applied Micro Technology uses the vertical blanking interval to allow Internet data to piggyback on a television broadcast at up to five times the speed of a standard modem and telephone line.
ECONOMIST: Is it tellynet or netelly? The

Something that is blank has nothing on it.
A blank is a space which is left in a piece of writing or on a printed form for you to fill in particular information.
If you look blank, your face shows no feeling, understanding, or interest.
blankly
If your mind or memory is a blank, you cannot think of anything or remember anything.
Blanks are gun cartridges which contain explosive but do not contain a bullet, so that they cause no harm when the gun is fired.
&rarrsee also point-blank
If your mind goes blank, you are suddenly unable to think of anything appropriate to say, for example in reply to a question.

沖裁
Fine blanking is an effective and economical metal cutting process which produces very highly precise work pieces with completely smooth, tear-free sheared surfaces.
精沖是精密沖裁的簡稱,是一種經濟有傚的金屬剪切工藝,精沖工藝可以獲得光潔度高、無撕裂的沖裁麪。
沖割

下料
沖裁
Blanking experiments were done, and the dynamic displacements of the slider were recorded. The press vibration can be judged based on the amplitudes.
設計了液壓機沖裁減振試騐系統,進行了幾種方案的沖裁實騐,記錄了滑塊的動態位移,由沖斷時沖頭的振動幅值判別振動的大小。
落料
斷流
穿落模
遮沒