stress-relaxation test

基本解釋

When performing a stress-relaxation test of soft tissues, a small preload is usually applied to the specimen to remove slack, and this preload is generally be neglected.
對軟組織進行應力松弛試驗時可給樣本施加一個小的預加力來去除樣本的松弛，該預加力通常被忽略。
According to ASTM E328-78, uniformly stressed plate specimen and the apparatus for stress-re-laxation testing are designed. Stress-relaxation test are carried out accordingly.
根據ASTM E328—78設計了等應力的片形應力松弛測試試樣，對其應力松弛測試裝置進行了初步探索，并進行了應力松弛測試試驗研究。
By means of constant strain-tensile test simulating long-term service conditions, the stress-relaxation behaviour of R-26 alloy for bolts of 300/600 MW steam turbines has been studied.
本文采用拉伸應力松弛試驗，模擬R-26合金在30/60萬千瓦汽輪機用作緊固件的工作條件，研究合金在高溫不同初始應力下，長期工作時的應力松弛行為。