常見例句

• Fewer workers are needed to solder circuit boards.
  焊接電路板需要的工人更少了。
• Joints between reinforcement members can be made satisfactorily with tin solder.
  錫焊能夠滿意地做成加筋構件之間的接頭.
• A number of metals and alloys, how ever , are difficult to silver - solder and require special procedures.
  但是有許多金屬和合金是難于銀焊的,因此需要采用專門的工藝方法.
• We should the adhibit of solder paste before screen printing by automatic machine or by hand.
  我們?cè)谶M(jìn)行錫膏印刷前應對錫膏進行一定的檢測.如果沒有專用設備也可以用以下的方法檢查一下.
• PCBs are transported by a conveyor system over the preheat, solder and cooling stations.
  電子線路板(PCB) 通過傳送系統經過預熱, 焊接和冷卻區域.
• Used with the solder wire together, soldering a stainless steel etc metal.
  同錫線一起使用, 焊接不銹鋼等難以上錫的金屬.
• Interface void damage is the failure characteristic of solder joint under temperature cycling.
  溫度循環載荷可以在焊點界面處形成足以導致空洞損傷發生的高應力三軸度.
• Solder side is chosen to measure.
  4量測以吃錫面為選擇點.
• Do the supplies use magnifying glass to full check PCB solder connections?
  供應商是否用放大鏡全面檢查PCB的焊點?
• And techniques to make free solder bumping with electroplating are illustrated.
  重點闡述了采用電鍍制作無鉛焊料凸點的方法.
• Do not use any warming device to heat up the solder paste.
  切忌用加熱工具對焊接材料進行加熱.
• It's easy to learn to make a perfect solder joint when you use NIBCO Fittings.
  如果使用美國尼伯科管件,很容易學會進行完美的焊料連接.
• Hand solder is recommended instead of reflow solder.
  不建議使用回流焊,推薦使用手動焊接.
• Then reheat the solder cup of the fitting to draw up the alloy.
  然后重新加熱管件焊料杯口以吸入融合合金.
• The second section will introduce the new slide valve and its application in Solder Paste process.
  第二部分介紹最新的滑動閥科技及其在點錫膏中的應用.
• Is the average and range of Solder Paste height measurements SPC controlled?
  錫膏厚度測量的平均值和間距SPC是否受控?
• Above two years solder sale experience.
  兩年以上焊料銷售經驗.
• Titanium alloy solder bath : suitable for lead – free solder.
  防腐蝕鈦合金爐膽: 適用無鉛工藝,壽命長. (先配項)
• No monitoring and control requirement on solder iron temperature.
  對烙鐵溫度沒有要求監測及控制.
• Oxide occurring after melting approximately 50 % less than common solder.
  熔解后氧化物(錫渣)之發生量較一般焊錫減低近半.
• Are LCD's and UCLA's defined for the average and range of Solder Paste measurements?
  對錫膏厚度測量的平均值和間距是否定義了其控制上限和下限?
• Careful tinning of the ends of wires results in a better joint when you solder them.
  仔細對金屬絲末端進行包錫有助于它們?cè)诤附訒r(shí)很好地結合.
• The solder wire should attain the standard provision deflection and pitch by straightening.
  焊絲經校直應達到標準規定的挺度和翹距.
• Theoretical models are given to qualitatively explain the relationship between the solder joint volume and performance.
  理論模型也定量給出了焊膏厚度與焊點性能之間的關系.
• Is the time recorded when the solder paster is taken out from the storage case?
  焊貼從存儲環境取出時的時間是否有記錄?
• If too much solder is used, it may flow past tube stop and clog sealing area.
  如果使用的焊料太多, 那么有些焊料可能會流過管道阻擋部位,并堵塞密封區域.
• Block incoming electrical solder joints with different samples!
  來料電機座的焊點與樣品不同!
• So it will result in rigidity skin & block and solder balls etc.
  產生的后果是:錫膏出現硬皮 、 硬塊、難熔并產生大量錫球等.
• He then soldered the wire to the telephone terminal.
  接著他把電話線焊接到電話機上。
• Careful inspection showed that the statue's head had been cast separately and soldered in place.
  仔細檢查發現雕像的頭部是鑄好后再焊接上去的.
• I superglued the switch and the soldered the contacts.
  我用強力膠水粘上了開關,并焊接好了觸點.
• Broken friendship may be soldered, but will never be sound.
  破裂的友誼可以焊接, 但永遠不會牢固.
• Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing.
  在高溫環境下,銅也表現很好,而且易于通過焊接或釬焊進行連接.
• Tin has replaced lead, which is more toxic, in a lot of soldering.
  的確,由于錫毒性較弱, 它已在許多焊接過程中取代了鉛.
• PCBs are transported by a conveyor system over the preheat, solder and cooling stations.
  電子線路板(PCB) 通過傳送系統經過預熱, 焊接和冷卻區域.
• Provides an optimum temperature for soldering PCB throughout reflowing operation.
  通過回流焊操作為焊接PCB提供最佳溫度.
• Used with the solder wire together, soldering a stainless steel etc metal.
  同錫線一起使用, 焊接不銹鋼等難以上錫的金屬.
• Wrot copper performs well in temperature applications and is easily joined by soldering or brazing.
  鍛造銅在高溫應用中具有很好的性能,易于采用焊接或銅焊進行連接.
• Copper tubing for circulating water is soldered to its underside.
  銅管循環水是焊接到其底部.
• Usually be used to soldering the protector tube, sensor, wire, reproducer etc.
  通常應用在保險管 、 傳感器 、 線材 、 揚聲器等產品焊接.
• Do not use any warming device to heat up the solder paste.
  切忌用加熱工具對焊接材料進行加熱.
• Hand solder is recommended instead of reflow solder.
  不建議使用回流焊,推薦使用手動焊接.
• Familiar with SMT processing, experience in selling soldering asconsideration.
  熟悉SMT工藝流程, 具無鉛焊接產品銷售經驗者佳.
• For instance, soldering the probes may cause unexpected changes in the contact resistance.
  例如, 焊接探頭可能會使接點發生不希望的變化.
• The neutrality flux must be used before soldering.
  焊接時要求用中性助焊劑.
• Adopted antistatic and metal shell is safety for soldering sensitive component.
  機身采用高度可靠的全金屬防靜電模式,焊接敏感組件更安全.
• Remove indicator knob prior to soldering. Replace after soldering is completed.
  在焊接之前,拆卸指示器按鈕. 在焊接完成后,重新防止安裝指示器按鈕.
• Careful tinning of the ends of wires results in a better joint when you solder them.
  仔細對金屬絲末端進行包錫有助于它們?cè)诤附訒r(shí)很好地結合.
• A process advanced to eliminate the roughness offront of automobile body's top cover after being soldered.
  探討了解決車身頂蓋前圍焊接不平整問題的工藝過程.
• The radiator assembly is now almost ready for soldering seal it.
  散熱器大會現在幾乎準備焊接勝局.
• When all IC's are placed and soldered, you can continue to place the capacitors.
  當所有的IC放置和焊接, 您可以繼續把電容器.
• Care must be taken not to overheat and damage valves during the soldering process.
  在焊接過程中,必須要小心謹慎,避免由于溫度過高導致閥門受到損害.
• When joint is filled, a continuous run of solder or brazing alloy will be visible.
  在安裝連接部件時, 可以看到焊料和釬焊合金繼續流動.
返回 solder