shrinkage strain
基本解釋
- 收縮變形;收縮應變
英漢例句
- The drying shrinkage strain develops slowly, since it is a function of the migration of the water through the hardened concrete.
干燥縮水應變發生較慢,因為它是一個水透過硬化混凝土的遷移作用。
gatefanyi.com - Throughout the drying process, the surface of the free shrinkage strain is the largest, the more close to the core layer the smaller the free shrinkage strain.
在整個干燥過程中,表層的自由干縮應變最大,越靠近芯層自由干縮應變越小。 - The rate of water evaporation, shrinkage strain and the area of cracks increase with increasing exposure temperature and wind velocity, and with decreasing relative humidity.
混凝土的水蒸發速率、收縮變形、開裂面積都隨著環境溫度和風速的增加而增大,隨著相對濕度的升高而降低;
雙語例句
詞組短語
- shrinkage e strain 收縮變形
- volumetric shrinkage strain 體積收縮率
- residual shrinkage strain 殘余收縮變形
- maximal shrinkage strain 最大干縮應變
- Temperature shrinkage strain 溫縮應變
短語
專業釋義
- 收縮應變
A coupled linear and exponential equation is finally developed from the obtained data to describe the shrinkage strain at the given initial drying density and water content.
最后,根據試驗結果,提出了壓實試樣收縮應變與初始干密度和含水率之間的函數關系式。 - 收縮變形
For the compacted specimens,the shrinkage behavior is significantly controlled by the initial drying density and water content. In general,shrinkage strain decreases with the increase of the initial dry density and increases with the increase of the compaction water content.
對于壓實試樣,初始干密度和含水率對收縮特征有重要影響:初始干密度增加對體積收縮變形起抑制作用,而初始含水率的增加對體積收縮變形起促進作用。管理學
- 收縮應變