preform

音標發音

The fabric is used as preform for thermoplastic textile - reinforced composite modules.
這種織物被用作熱塑性紡織增強復合材料模件的預型件.
Two Methods: Used to liquid impregnate carbon fiber preform are introduced.
介紹了液相浸漬炭纖維坯體的兩種方法.
Most preform moulds are rectangular and are longer than they are wide.
大多數的瓶坯模具呈長形,就是長度比闊度大.
The fabric is used as preform for thermoplastic textile - reinforced composite modules.
這種織物被用作熱塑性紡織增強復合材料模件的預型件.
Two Methods: Used to liquid impregnate carbon fiber preform are introduced.
介紹了液相浸漬炭纖維坯體的兩種方法.

預制體
預制件
It is prerequisite to measure the three-dimensional braided composite materials preform s technical parameters in the process of its design and production.
在三維編織復合材料預制件的研制和生產過程中，需要測量和分析材料的工藝參數。
預成型體
預制塊
The composites were observed by light microscope. The combination quality of matrix between composite layers is deteriorated when density of preform is increased.
通過光學顯微鏡對復合材料組織進行研究,發現隨著Ti-C體系預制塊致密度的提高(50%～65%),復合材料中過渡層質量下降。
預成形坯

預成形
The proposed FEM preform optimization method is very effective and overcomes abuse of experience design.
所提出的有限元模擬預成形優化方法十分有效,克服了以往憑經驗設計的弊端。
預先形成

預制棒
And Erbium-doped fiber preform is fabricated using this method.
并利用這種方法實際制作了摻鉺光纖預制棒。
計算機科學技術
預制件
It is prerequisite to measure the three-dimensional braided composite materials preform s technical parameters in the process of its design and production.
在三維編織復合材料預制件的研制和生產過程中，需要測量和分析材料的工藝參數。
預制體
However, there are still many difficulties in mass production of qualified preform of paper-based friction material using manual sheet-making apparatus. So a semiautomatic sheet-making apparatus was designed to make an improvement.
借鑒于造紙工藝的碳纖維增強紙基摩擦材料預制體成型工藝——“抄片”，成為保證預制體增強纖維、摩擦性能調節劑和填料在預制體中均勻分布的重要一環。
材料科學
盤料