crushing strength
基本解釋
- [力] 壓碎強度;抗碎強度;破碎強度
英漢例句
- The influence of green ball quality and palletizing crushing strength are studied by using different size distribution of DAYE concentrate.
研究了不同的粒度組成大冶鐵精礦對生球質量與成品球團抗壓強度的影響。 - In addition, according to the crushing strength and physical, chemical properties of manganese nodule, the testing method for crushing using toothed roll crusher is established.
同時根據錳結核的破碎強度和物理化學特性確定了用齒輥破碎方式進行破碎的實驗方法。 - The bulk crushing strength and Abrasion strength are evidently different with the category of activated carbon.
測定了原粒度活性炭的堆積壓碎強度和磨耗強度。 - Not only does the robot look Terminator-esque, but it's been designed to mimic the muscle system of a human (with bone-crushing strength, of course) and will be programmed with a semi-autonomous AI so that the android can learn new tasks, all of which is just a little too much like the Terminator for our comfort.
ENGADGET: Prepare to be terminated: The Kibertron
雙語例句
權威例句
詞組短語
- crushing g strength 破碎強度
- increase particle crushing strength 提高強度
- crushing strength constant 壓潰強度系數
- radial crushing strength test 徑向壓潰強度試驗
- radial crushing strength constant 徑向壓碎強度系數
短語
專業釋義
- 壓碎強度
The porosity(Pa)was 36.97%,water absorption(Wa)was 20.34%,bulk density(D)was 1.82kg/m~3,crushing strength was 13.50MPa,acid resistance was 96.76%and alkali resistance was 97.38%,when the optimal sample YC2 was fired at 1080℃with 20 wt%additional content of graphite added.
典型配方YC2石墨添加量達20wt%(外加),于1080℃下燒成樣品的顯氣孔率為36.97%,吸水率為20.34%,體積密度為1.82kg/m~3,抗壓碎強度為13.50MPa,耐酸性為96.76%,耐堿性為97.38%。化學
- 耐壓強度
By reducing the addition of reused magnesia chrome bricks,the crushing strength,MOR and bulk density became higher after drying and firing at medium and high temperature.
隨著廢鎂鉻磚加入量的降低,烘干、中溫和高溫處理后的耐壓強度、抗折強度、體積密度均逐漸增大。醫藥科學
- 抗碎強度
- 壓碎強度
- 破碎強度
- 壓毀強度
- 抗碎強度