average of defect rate

基本解釋

Average rate of the deposit defect examined is below 1.5%. The causation and situation of microcracks and voids are analysed in the test.
試驗對堆焊層的平均孔隙缺陷率進行了測算，測算結果為碳化鎢合金顆粒平均孔隙缺陷率低于1.5 % ，并對裂紋、孔隙分布及產生原因進行了分析。
The experimental results demonstrate the feasibility and effectiveness of the proposed method in surface defect inspection, furthermore, the average accuracy rate can reach 94.40%.
實驗結果表明，本文算法在表面缺陷檢測系統中的可行性及有效性，在多類缺陷分類中達到94.40%的總準確率。
cjig.cn